330 ton Injection molding machine for basins
Basic Info
Model No.: BN-330F
Product Description
330 ton Injection molding machine for basins
Five-support crankshaft structure. The mold and support all use the portal structure ,with good rigidity and high fitting precision. Adopting the computer optimized design ,the mold employs definite analysis less system. With double core pulling device, it boasts super sensitive low pressure protection functions.
Clamping system:
-We adopt five fulctum hyperbolic elbow clamping mechnical which can tansfer power effectively and ensure the prcess of high speed response
-Low pressure mold protection system
-Tie bar adopts surface hard chromium plating processing
-Mould platen bottom support use copper material which can protect steel belt
-Automatic centerial lubricarion system which is easy for after service
Injection system:
-Optimization design of the injection unit to provide higher accuracy,ensure the higher stability
-Injection parts adopt double guide tie bars which improve inject technology
-Injection,holding pressure closed-loop control and precision back pressure control
-Cylinder temperature time monitoring to ensure high quality molding requirements.
Electric system:
-The advanced injection Plastic machine computer work stable and accurate
-Intelligent method of defects in the course of injection process parameters
-It can save more than one hundred program
-It is equipped with mechanical arm eletrical interface which can be used to match the special mechanical arms for the injection robot.
Hydraulic system:
-Dual proportion load induction oil circuit is used to get steady operation,energy consumption variable with load and energy saving
-The oil box volume is large and the cooling system is arranged properly, it can reduc the oil efficiently
-High function oil pump,liquid motor, seal element can snsure low noise and zero penetration.
-All adopt international well-know hydraulic components
Technical parameters:
BN-330F | ||||
INJECTION PART PARTE INYECCIÓN | UNIT | A | B | C |
Screw diameter Diámetro del tornillo | mm | 60 | 65 | 70 |
Screw L/D ratio Tasa L/D del tornillo | L/D | 22.5 | 20.7 | 19.1 |
Shot volume Volumen de Inyección | cm3 | 933 | 1095 | 1270 |
Injection weight(PS) Peso de la inyección | g | 849 | 996 | 1156 |
oz | 30 | 35.1 | 40.8 | |
Injection rate Tasa de inyección | cm3/ s | 250 | 293.4 | 340.3 |
Injection pressure Presión de inyección | Mpa | 213.6 | 182 | 157 |
Screw speed Velocidad del tornillo | rpm | 190 | ||
CLAMPING PART PARTE DE CIERRE | ||||
Clamping force Fuerza de cierre | kN | 3300 | ||
Opening stroke Apertura | mm | 660 | ||
Space between tie bars Espacio entre barras | mm | 660×660 | ||
Mould thickness Espesor de molde | mm | 250~680 | ||
Ejector stroke Carrera del expulsor | mm | 160 | ||
Ejector force Fuerza del expulsor | kN | 62 | ||
OTHERS Otros | ||||
Oil pump pressure Presión de la bomba de aceite | Mpa | 16 | ||
Oil pump motor power Potencia del motor de la bomba de aceite | kW | 37 | ||
Heater power Potencia del calefactor | kW | 19.7 | ||
Machine dimension Dimensión de la máquina | m | 7×1.85×2.4 | ||
Oil tank capacity Capacidad del tanque de aceite | L | 580 | ||
Machine Weight Peso de la máquina | t | 12.8 |
Product Categories : Fixed Pump Injection Molding Machine